DripNet PC™ AS

The most profitable solution for sub-surface drip irrigation in any topography or water condition

Featuring an anti-siphon mechanism, the DripNet PC™ AS integral PC dripper ensures reliable and uniform sub-surface drip irrigation (SDI) in any kind of topography.

Anti-siphon mechanism prevents dirt-suction during system draining, making it essential to dripperlines installed under the soil
Ultra-wide and short water passages and continuous self-cleaning improves clogging resistance, especially in harsh water conditions

Why DripNet PC ™AS?

Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
Anti-Siphon mechanism: Inhibits contaminants being drawn into the dripper from the outside, which is needed in sub-surface applications.
Continuously self flushing: Continuously flushing debris, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted dripper operation.
Self-flushing system with wide filtration area improves resistance to clogging this allows reduction in filtration requirements, and increases filtration efficiency.
TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance. The water is drawn into the dripper from the stream centre, preventing the entrance of sediments into the drippers.

Specifications of DripNet PC™ AS

Flow rates: 0.60, 1.00 & 1.60 ℓ/h
Pressure-compensating range: 0.5 - 4.0 bar
Recommended filtration: according to dripper flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeds 2 ppm in the water, a Hydrocyclone is to be installed before the main filter. When sand exceeds 20 ppm and when total suspended solids exceed 150 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
Double TurboNet™ labyrinth with large water passage.
To be “welded” into thin-, & medium-walled dripperlines (0.40, 0.60 mm).
High UV resistance. Resistant to standard nutrients used in agricultural.
Injected dripper, very low CV.
Injected silicon diaphragm.