Bookmark : https://www.netafim.co.za/products-and-services/streamline/?id=95&entryId=34
Skip to : [Content] [Navigation]

Products


Streamline™

Streamline™

Integral dripper

Applications:

Row crop irrigation.

Specifications:

  • Recommended filtration: 100 micron.
  • TurboNet™ labyrinth with large water passage.
  • Welded into light-walled dripperlines (0.15 mm and 0.20 mm).
  • Injected dripper, very low CV.
  • UV resistant. Resistant to standard nutrients used in agricultural.
  • Streamline™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).
  • Nominal diameter: 16 mm
  • 2 flow rates, 2 wall thicknesses
Streamline™ Wall thickness Dripper flow rate Dripper spacing
Streamline™ 16060 0.15 mm 1.10 litres per hour 0.2 metre
Streamline™ 16060 0.15 mm 1.60 litres per hour 0.2 metre
Streamline™ 16060 0.15 mm 1.10 litres per hour 0.3 metre
Streamline™ 16060 0.15 mm 1.60 litres per hour 0.3 metre
Streamline™ 16060 0.15 mm 1.10 litres per hour 0.4 metre
Streamline™ 16060 0.15 mm 1.60 litres per hour 0.4 metre

These flow rates are at a pressure of 10.0 metres. However, the maximum pressure for Streamline™ 16060 is 8.0 metres, at which pressure these flow rates become 1.00 litre per hour and 1.45 litres per hour respectively.

 

Streamline™ Wall thickness Dripper flow rate Dripper spacing
Streamline™ 16080 0.20 mm 1.05 litres per hour 0.2 metre
Streamline™ 16080 0.20 mm 1.05 litres per hour 0.3 metre
Streamline™ 16080 0.20 mm 1.60 litres per hour 0.3 metre
Streamline™ 16080 0.20 mm 1.05 litres per hour 0.4 metre
Streamline™ 16080 0.20 mm 1.60 litres per hour 0.4 metre

These flow rates are at a pressure of 10.0 metres. The maximum pressure for Streamline™ 16080 is 10.0 metres.

Features and Benefits:  

  • Wide filtration area to ensure optimal performance.
  • TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
  • The water is drawn in to the dripper from the stream centre, preventing the entrance of sediments in to the drippers.
  • Injection molded dripper construction , ensuring uniform drippers and very low CV.
  • Flap outlet inhibits back-suction of debris.



Downloads

Ask the Expert

Request More Information





Staff login